6/27/2023 0 Comments Folder lockit 2.3Shall allow setup and configuration through a system-wide management software from an XTP CrossPoint matrix switcher communication channel.Shall provide one (1) female mini USB port B on front panel for setup and configuration.Shall provide one (1) two-pole captive screw connector on rear panel for bidirectional IR pass-through.Shall provide one (1) bidirectional RS-232 captive screw connector on rear panel for control pass-through.Ethernet pass-through port to reduce the number of independent network drops.Shall provide one (1) 10/100 Ethernet port.Shall provide interconnection between the transmitter and an XTP Series receiver or input board over one, shielded CATx twisted pair cable.Shall provide one (1) RJ-45 twisted pair connection.Shall provide signal transmission over a single, shielded CATx twisted pair cable.Shall support signal extension of 4K video, audio, and control signals plus Ethernet up to 330 feet (100 meters).Shall provide one (1) female HDMI Type A loop-through connector with selectable audio control for a local monitor.Shall provide analog audio gain and attenuation adjustment capability.Shall support audio only signal extension.Shall provide one (1) 5-pole captive screw connector for balanced/unbalanced analog audio.Shall provide one (1) female HDMI Type A connector – shared with video input. Shall provide selectable HDMI audio pass-through via toggle switch on rear panel.Shall support audio embedding of analog audio.Shall support multiple embedded audio formats.User-selection of EDID from pre-stored data files.User selection of EDID from any connected display.Maintain continuous EDID communication with the connected source.Shall provide automatic EDID management between connected devices.Shall provide human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display.Shall provide the option to disable HDCP processing at the HDMI input connection when passing unencrypted content.Shall provide authentication and maintain continuous verification of HDCP key exchange between connected devices.Shall support HDMI 2.0 specifications of. Shall support RGB and YCbCr color space formats.Shall support computer and video resolutions up to 4096x2160 at 30 Hz with 4:4:4 chroma sampling.Shall provide one (1) HDMI Type A connector with buffered loop-through and selectable audio control.Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio.Long distance signal extension of digital video with embedded multi-channel audio, Ethernet, and bidirectional control signals over a shielded CATx cable.
0 Comments
Leave a Reply. |